The development of our StalkPuller began with an interesting problem. The task was to remove stalk and root residues from the stubble. Naturally, our first recommendation was the BUSA Rotor in a strip‑till configuration, which works well if the goal is to crush the stalks to prevent corn borer overwintering. However, it doesn’t pull out the root balls — it
That’s how this development is. We took a machine out to Agritechnica, and I haven’t even written an article about it on the website yet. But it’s an exciting piece! We could even call it the BUSA regenerative farming starter kit – kind of like a Swiss Army knife, painted yellow. The simple yet versatile structure can be mounted at
Ez itt a (közepesen) Frissen A tervezőasztalról 2025 évi első kiadása, a MousePlow
This is the (moderately) Fresh from the drawing board 2025 first edition, the MousePlow
A while ago, one of our partners pressured us to make a variation on our strip-till cart that could be used to clear field weeds. It wasn’t until it was ready that
Last year, I unexpectedly became involved in an irrigation project that sparked my serious interest. The severe droughts of recent years and my incidental encounters with irrigation left me pondering. I had heard of it before but never really considered its potential importance. However, it turned out to be crucial. For those unfamiliar, drip irrigation pipes are laid below the
There are many variations of our GYMF, Rotary weeder series, and over time, this will only increase. Naming it is a difficult task. For a while, we have been avoiding the problem that within a farm, it is sometimes necessary to work with different row spacings. A 2m and 2.5m row spacing vineyard is not uncommon within a farm. The
Today, we are showcasing a very exciting machine. To be honest, this is a prototype we have only cooperated on, but it will soon appear in our portfolio. Credit to Franz Grötschl! The Grö-till technology debuted at Agritechnica 2023, which is an alternative min-till strip-till system. It has been continuously evolving since then, but the basics are becoming clearer. The
Hello everyone, welcome to our “Fresh from the drawing board” section. Let me tell you about our spring-loaded rubber-finger weeding system, the Springerhacke. We managed to come up with a nice name, didn’t we? It all started when we wanted to cultivate lavender. Next to it, only the BUSA Rotor can go, but what about the row spacing? Our best
Hello everyone, welcome to our Fresh from the drawing board section. Today, we are introducing a typically no-till accessory tool. The machine is essentially a pre-cutter module. It can be attached to the rear of a conventional seeder, and its discs cut the soil surface, whether it’s stubble or crop residue, preventing the seeding elements from clogging. This specialized X-shaped
